Heavy-Duty Irrigation Solutions for Farmers, Ranchers, and Agricultural Operations
At B&M Pump Irrigation Sales & Service, Inc., we’ve been helping Texas farmers and ranchers keep their land watered and productive for over 60 years. So if you’re looking for irrigation line shaft turbines and irrigation pump parts in Texas, you’ve come to the right place. Our products are built to stand up to tough conditions, long seasons, and the demanding water needs of agriculture in the Lone Star State.
Additionally, whether you’re irrigating cotton fields in West Texas, ranchland near the Panhandle, or pecan orchards further south, our line shaft turbines and pump parts deliver consistent, high-volume water flow when and where you need it. And with a wide range of sizes, configurations, and replacement parts in stock, we’re ready to support your irrigation system from start to finish.
What Is a Line Shaft Turbine?
A line shaft turbine pump is a powerful vertical pump designed to move large volumes of water from deep wells, rivers, or canals to the surface for irrigation or other uses. These pumps are often used in high-volume ag operations because they provide dependable water delivery with minimal maintenance and a long operating life.
Each turbine pump is made up of several key parts:
- Motor – Usually mounted above ground, this powers the entire pump system.
- Discharge Head – Connects to the output pipe and directs the water flow.
- Column Assembly – A vertical pipe that carries water from the pump bowl up to the surface.
- Line Shaft – Transmits power from the motor down to the impellers.
- Impellers – These spin to create pressure and velocity, moving water upward.
- Bowls – House the impellers and guide water flow; may be single or multistage.
- Suction Bell – Brings water into the pump from the source.
- Bearings & Couplings – Ensure smooth, aligned rotation of the shaft.
- Stuffing Box or Mechanical Seal – Prevents leakage at the point where the shaft exits the pump.
This complete system is ideal for heavy-duty irrigation needs where volume and reliability matter.
Key Benefits of Our Irrigation Equipment
Here in Texas, water is too important to trust to cheap parts or under-performing pumps. That’s why we only offer irrigation products that meet our standards for durability, efficiency, and longevity.
Here’s what you get when you work with us:
- Custom-built turbine systems designed to match your well and output needs
- Compatibility with existing motors, piping, and pump stations
- Corrosion-resistant materials to handle local soil and water chemistry
- High-efficiency impellers and bowls to save energy and extend performance
- Field-tested solutions built specifically for Texas farmers and ranchers
- Expert support and fast shipping on repair parts and full assemblies
And with over 30 trained technicians and installers across our Texas and New Mexico locations, we’re ready to help with everything from new installs to seasonal maintenance.
Replacement Pump Parts In Stock and Ready to Ship
Need to keep your current pump running strong? We stock a wide variety of irrigation pump parts for fast replacement and reduced downtime. Whether it’s a worn-out impeller or a cracked bowl, we’ll get you the right part at the right time.
Common parts we carry include:
- Impellers
- Bowls
- Bearings
- Line shafts
- Stuffing boxes
- Seals and gaskets
- Shaft couplings
- Suction bells
And if we don’t have it in stock, we can usually source and ship it fast to keep your system online.
Built for the Land. Backed by Experience.
We’re proud to support the hard-working people of Texas — folks who depend on irrigation not just to make a living, but to grow the food and resources that fuel the entire country. We understand the soil, climate, and water conditions unique to the Panhandle, West Texas, Central Texas, and the South Plains, and we build our systems accordingly.
And with our decades of experience, local service crews, and a reputation for honesty and hard work, B&M Pump is here to help you make the most of your water resources—season after season.
Frequently Asked Questions
What size turbine pump do I need for my well?
Pump size depends on your well depth, flow rate, and pressure needs. Give us a call with your specs, and we’ll help match you with the right setup.
Can you help install the turbine system?
Yes. We have field teams throughout Texas that can handle installation, start-up, and troubleshooting.
Do you offer parts for other brands of pumps?
We carry parts for a wide variety of major brands. Let us know your model and we’ll check compatibility.
How often should I service my line shaft turbine?
We recommend annual inspections before each growing season, along with lubrication and basic wear checks to keep your system running smoothly.
Your Source for Reliable Irrigation Equipment in Texas
At B&M Pump Irrigation Sales & Service, Inc., we’re committed to providing reliable irrigation line shaft turbines and irrigation pump parts in Texas that stand up to the elements and the workload. So whether you’re expanding your system or need a part replaced fast, we’re here to help you stay productive and prepared. Just be sure to reach out and contact us today — we’re ready to earn your business and keep your Texas-based operation flowing as strong and smoothly as possible.